J’ai terminé la remise en état de mon chauffage et je suis maintenant prêt à l’installer.
Je voudrais remplacer le joint rond du collecteur d’admission et le joint de traversée du pare-feu pour les tuyaux du chauffage — quelqu’un sait-il s’ils existent (SJ ne les répertorient pas) ou existe-t-il une astuce pour les fabriquer soi‑même ?
À bientôt
Jon
Jon
Have you tried Clive at Classic Team Lotus, if you mean the rubber grommet/seal through the bulkhead, they have those I believe. As for the plenum seal, do you mean the foam seal or the seal around the top of the plenum? I recall you can make the foam seal quite easily. SJ keep both and are on their website under Heater.
Tony
Hi Tony,
I mean the large circular foam seal that goes around the fan inlet and seals it to the bulkead, and the rectangular foam seal where the heater pipes pass through the bulkhead.
I’ve checked SJ again and don’t seem to see them?
Cheers
Jon
Jon, The circular one is 1/2" thick x 7/8" land, the one on the pipes is 1" thick. Looks like closed cell rubber- you could use tape for the large circle.
Jon
They are on the SJ site under Elan 1,2,3,4, heater and ventilation
Tony