Class | 111 |
---|---|
Number | 1972/02 |
Type | Elan |
Date | 14.04.1972 |
Title: | Waterproofing of Doors |
---|---|
Reason: | To prevent the possibility of water seeping through the door panel via the upper drain hole. |
Parts Required: | Snapsac: 428A - 2 per car Tubing - X036 B6309V - 2 per car |
Action: |
- In approximately June 1971, the following modification was incorporated into Production and can be used to rectify cars built before that time.
- Cut the closed end from a Snapsac and insert the into the upper drain hole at front of the door. Remove door trim panel (see Section ‘B’ of Workshop Manual ) and push a piece of tubing over the open end of the Snapsac which is now inside the door.
- This action will channel the water from the upper drain hole to the lower drain hole, thence out of the door.