Hi, could anyone give me:
Correct lenghts of heater hose on the supply and return line from motor to heater core.
If i remember correctly 30 years ago, 5’ total lenght was alittle short!
TIA
Hi, could anyone give me:
Correct lenghts of heater hose on the supply and return line from motor to heater core.
If i remember correctly 30 years ago, 5’ total lenght was alittle short!
TIA
Just replaced both of mine, it’s 1/2" hose & 5 feet will do it!
May I ask how you dealt with the right angle hose to heater connection and are the heater connection close to the firewall or the dash?
Usefull picture, thanks!
Update FYI:
Total length of heater hose needed: 5 feet (after stuffing extra hose length under dash, I had 1" extra leftover)
ID: 1/2"
Inlet hose length (right side): Water Pump Housing to heater core: >36",
-can be longer if you allow extra length under dash, I noted hose end to be damaged due to age at the housing.
-cutoff damaged end (after 20 yrs) and use again!
Return hose length (left side): Thermostat housing to heater core: >19"
Picture below are the heater hoses I removed.
The extra pieces of hose: