Current brake upgrade for +2 Elan

MIO engineering website does not seem to exist anymore.
Does anyone know of a current brake upgrade particularly for the back and handbrake?
I’m running 14 inch minilights on standard hubs.

I did a rear brake conversion , from hi spec, I lent them an upright and had a caliper bracket made up, it was a while ago tho’

Elan 66

If you have any pictures or other information on the HiSpec conversion I would be grateful if you could share them here.

Ian

What’s wrong with original setup, with modern pads I’ve had no issues in race and rallying and Elan.

I did it on a previous project as I had no rear calipers to start with, the hi spec were a lot lighter too

Hi. Im interested in the hispec rear caliper for the +2.
Which caliper did you use? Did it include the handbrake?
Many thanks
Ken

The handbrake is never particulary good!

Getting the handbrake to work is all about setting up carefully, ensuring everything is moving freely rebushing worn holes, springs adjusted, deglaze pads as this is a typical issue due to poor adjustment in past.
V